On Thu, 7 Nov 2002, Luberth Dijkman wrote:

*>hello,
*>
*>maybe some dril to cutter  info on:
*> http://home.hccnet.nl/m.de.roode/cutters/body_cutters.html
*> http://home.hccnet.nl/m.de.roode/drill2cutter/body_drill2cutter.html

Trust me, break off the standard drill in the middle of the fluted side
and use it as is for soft material. Probably only works with soft
materials and high speed/low diameter but I HAVE seen real router bits
that have a single excentric tooth. The shape of the fluted part of a
drill bit makes it work even without fluid (self cleaning tip). Since the
tip becomes extremely sharp when breaking it extra sharpening is not
needed. When it wears off break some more off it or replace it with a
fresh bit.

Peter

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu