>I seggested a keyboard wedge as I thought the original poster mentioned
>something about also doing some keyboard stuff. I figured he could
>perhaps kill two birds with one stone.
>
>Josh


Hi again.
Below is the original post. As far as I can see (English isn't
my native language...), it says "in order to interface to a pic".
No mention about "PC" or "PC-keyboard". Now, I'm not sure
what "possibly KBD scan codes" means, should they be read
from the barcodes lables? And what is a "code concept" ?

My recomendation is still a RS232 based scanner connected to the
USART on the PIC. I'd look at Symbol, Intermec or some other
quality brand.

And a description of the actual application whould help a lot !

Best Regards
Jan-Erik Svderholm.


> Looking for a hi resolution bar code wand or scanner, (possibly a CCD)
> for reading thermal labels as well as support circuit, plus code concept
> (possibly KBD scan codes), in order to interface to a pic. Thanks,
> {slewrate}

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu