Theres a company in the UK called Eurobearings (I used to work for them) who
sell all the stuff to make 3 axis milling/routing machines. They used to
have one that they'd built which was the size of a small room. You could put
a full size router onto it or a felt tip.

Mad bit of kit - might be worth ringing them to see if they still do all the
parts if anyone wants to build their own 3 axis machine

Dom
----- Original Message -----
From: "Josh Koffman" <listsjosh@3MTMP.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, November 07, 2002 4:16 PM
Subject: Re: [EE]: Printer to PCB?


> Well, I know I'd be interested. Perhaps you can setup a page on
> piclist.com about this?
>
> Josh
> --
> A common mistake that people make when trying to design something
> completely foolproof is to underestimate the ingenuity of complete
> fools.
>         -Douglas Adams
>
> Cristian wrote:
> > If interested, I can give you simple instructions to modify a Lexmark
Z31
> > to accept a 1.5mm PCB.
> > Any good, practical, idea of FeCl resist ink in a printer cartridge?
> > Cristian
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu