Tony Nixon wrote:

>I recall mention on the list about the IO pins used for UART use are
>automatically configured when the USART is enabled.
>
>
>This is not the case with the 628 chips. The TRIS bits must be set
>accordingly for it to work. ie. RX = in, TX = out.
>
>It is in the data sheet, although I missed it and got stung.
>
I missed it too (but I never had trouble with it :-))
If you look at p 36, p37 of DS40300B, you can see that it's not
necessary to write to tris ???
Can you tell me where it's in the datasheet and which datasheet
(Miicrochip has a number of erata) ?
cheers,
Stef Mientki

>--
>Best regards
>
>Tony
>
>mICros
>http://www.bubblesoftonline.com
>mailto:sales@bubblesoftonline.com
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body