hey...any details on the christmas rope? time is approaching... >From: Quentin >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: Re: What have you designed using PIC? >Date: Fri, 5 Jul 2002 18:09:53 +0200 > >Hi all >Business: >Multifunction counter with LCD - currently in production. >Large LED display - currently in production. >Various once off stepper controls and indexers (about 7). One of then I >replaced a 24 chip 8051 system with a 3 chip (16C54, and two I2C I/O) >system and it had more functions. It was also the first PIC project I >got paid for. >Slave followers (Machine control) >Heater control (12C508, PWM, Mosfet) >Magnetic brake control (12C671, PWM, Mosfet and A/D) >12-24 DC motor control (12C671, PWM, Mosfet and A/D) >Cut size controller for a sawmill. >Oil feed controllers. > >And a whole bunch of projects NDA, under development, and scrapped >ideas. >And the fastest turn around from idea to operation: 1.5 hrs. Needed 2 OR >gates and 1 AND gate. 12c508, Veroboard, installed and up and running. I >picked up a lot of respect for these 8 pin micro's over the years. > >Hobby: >R/C speed control >R/C elevon mixer >64 LED Xmas lights rope (made the wife happy) Each LED can be switch on >individually. >Wish I had more time to do hobby stuff. > >Quentin > >-- >http://www.piclist.com hint: To leave the PICList >mailto:piclist-unsubscribe-request@mitvma.mit.edu _________________________________________________________________ Get faster connections -- switch to MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.