Hi Tom!

I got both working later on.  Just have to use the right SPI mode and have
the technicial glue the xtal down right!

Andy

At 05:16 PM 11/2/02 -0800, you wrote:
>    Howdy Andy! It's been awhile since I used a MAX3100 with a PIC but I
>had an application using a remote sensor that sent data at 115Kbaud
>using 9-Bit addressing. All I can say is the MAX3100 worked as
>advertized using a simple `bit-banged' SPI interface. I was working
>from data sheet 19-1259; Rev 0; 7/97.
>
>    As far as the DS1306, I've used similar parts and they always had a
>configuration bit to start the oscillator.
>
>    - Tom
>
>At 02:21 02-11-02, Andy Kunz wrote:
>>Has anybody used any of these devices with a PIC?  We're having all kinds
>>of fun -
>>
>>the DS1306 xtal doesn't appear to be oscillating
>>the values read back out of the chip don't make any sense
>>
>>I haven't gotten to test the MAX and ADC parts yet - hopefully they will be
>>cleaner.
>>
>>Any pointers would be appreciated.
>>
>>Thanks
>>
>>Andy
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

-------------------------------------------------------------------
Race Boats  - andy@RC-Hydros.com      http://www.RC-Hydros.com
Airplanes   - andy@FlyingHobbies.com  http://www.FlyingHobbies.com
Electronics - andy@MontanaDesign.com  http://www.MontanaDesign.com
-------------------------------------------------------------------

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu