Hi Fred,

Big project.  I use a shuttle when winding onesies or twosies.  Usually
works quite well.  For quantity work I have it done commercially.  Try
Energy Transformation Systems http://www.etslan.com I've had good luck
with them.

Best regards,
Dave

fred jones wrote:
>
> Hi all,
> I am experimenting with winding some larger diameter toroid coils.
> Approximately 2"ID and 6"OD with a couple thousand turns of magnet wire.  I
> started looking and found plans to build a coil winder (solenoidal) but I
> couldn't find any plans to build a toroidal winder.  Does anyone know where
> there are any plans to build one?  My online searches have shown some Asian
> companies that make suitable machines but I'm sure they are out of my hobby
> budget.  Again, thanks for any help.
> Fred
>
> _________________________________________________________________
> Broadband? Dial-up? Get reliable MSN Internet Access.
> http://resourcecenter.msn.com/access/plans/default.asp
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.