Hi Tony,

I think that is only a doc bug ...  I have built a small programmer (my
design, for programming 18F devices some months ago) and I used this device
to help with 12F, without prob.

I think IC-PROG is using the same algorithm too ...

Fabio

----- Original Message -----
From: "Tony Nixon2" <Tony.Nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, October 21, 2002 2:58 AM
Subject: [PIC]: 12Fxxx programming


> Hi all,
>
> I hope Microchip got it right.
>
>
> In all PICs I have seen with regards to programming, MCLR is raised to
> VPP after raising VCC. In the data sheet for the 12F675 it mentions to
> raise MCLR to VPP 'before' raising VCC.
>
> I have noted in earlier PICs about applying high voltages to MCLR before
> power is applied and damaging the pin.
>
> Anyone have some more insight?
>
>
> Best regards
>
> Tony
>
> mICros
> http://www.bubblesoftonline.com
> mailto:sales@bubblesoftonline.com
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.