Oops I forgot something important:

You need to connect the circuit to a DC 12V source too, and read the AB
voltage in DC, then when measuring in AC substract this voltage from the
readout, otherwise the readout will be way off imho. This is due to the dc
resistance of the coil. The method above removes the dc resistance (well,
almost), from the end result.

Peter

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads