> Hmmm, I've tried it today whith not so good result ;-)
>
> I made a Fluffy2 (what a name !!) programmer and got the IC-PROG

That is not suport the sx type micros, just the dos sw.

> So next comes the s/w. The F84 seems to be running OK, it oscillates
> and I've tried 3 with the same result. In the menu of supported devices
> the SX18 isn't shown, but as the programming socket for the SX18 and
> SX28 are paralleled I presume that the algorithm for the SX28 works for
> the SX18 ?

Try to use the dos sw: fluffy -com1 -test, and follow the instructions.

>
> And then there are the settings in IC-PROG. The I/O delay is set to 4 for
> my 800MHz PC. I've tried other settings. Do any of the signal inversions
> need to be set ?

I have a p3-600 and working well.

udv
Csaba

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads