--=======77105007=======
Content-Type: text/plain; x-avg-checked=avg-ok-3BC086; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 8bit

Russell,

Any further developments on the ATtiny26 and STK500 issues?

I was following this thread with interest, as my samples arrive on Monday.

Regards
John


>Katinka,
>
>I am using the ?blue 20 pin socket which has the correct pinout for a 26.
>All programming lines except Reset seem correct. The Reset line does not go
>to the programming header but can be picked up on a 4 pin options header.
>
>How did/do you connect Reset?
>Connecting Reset to ground (which is where it should be during programming)
>produces apparently OK handshake but does not produce a correct verify.
>Connecting uP-Reset to Reset from the programming header causes failure of
>programming.
>
>Do you need a clock connected to X1 during programming or verify?. Datasheet
>is unclear (ie says you may or may not depending on fuses - doesn't seem to
>say what the default is.)
>
>I can connect a clock line from elsewhere on board but would be nice to know
>what others have got to work. Also disturbing that connection to socket
>onboard from reset line is not complete even though all others are.
>
>
>             Russell McMahon

--=======77105007=======--

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.