On Tue, 8 Oct 2002, Mike Mansheim wrote:

> I have a board that had a 16F876 and a 24LC01 eeprom on it.  Something
> happened to the board that damaged both the processor and the eeprom.
> If the eeprom is moved to an otherwise good board, SCL is low all the
> time.  Is there any way to recover the data stored in this chip?

  The same like used by the russians when they have copied the 8080 a
looong time ago:
  use a very thin and delicate file and a good microscope...
  then on a mathematics copy-book draw x and o as you see on the
microscope

  :)

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads