At 10:03 AM 9/25/02 -0700, paul wood wrote: >I want to make a small rectangular hole on a plastic >enclosure so as to fit in a slide switch, but since it >is not circular, I cannot use a drill. Is there any >way or tools to make this hole easily? Drill a round hole first, then file it to shape. Since you are filing plastic, a square file with coarse teeth is probably best. Won't cost more than a few dollars at your local hardware store. dwayne -- Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 18 years of Engineering Innovation (1984 - 2002) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics