>-----Original Message-----
>From: Matt Johnson [mailto:matt@ALTAPACIFIC.COM]
>Sent: Saturday, September 21, 2002 1:58 PM
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC]: Projector Lift
>
>
>Can you gear me towards a project for a universal remote that is
specific
>to the PIC or AVR? I have not been able to find one!
>
>- Matt


Matt,
I have had good success using the PIC IR decoder from
Terry Weeder. This was from an article in the Feb. 1998
issue of "Nuts & Volts". It uses a 16C54 along with an
external EEPROM. You can get order a back issue from
www.nutsvolts.com, and the software is at their ftp
site: ftp://nutsvolts.com/irremote.zip

This project can be programmed to any 38-40 khz remote
control that you like, and can be re-programmed easily.

There is also a version that has been ported to C and
should be more "portable" (if you have a C compiler).
You can find info on this at www.zianet.com/tdl/download.htm

I have not tried this "updated" version.

Good Luck,
Lyle

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu