I have been looking into some of the offerings TI has for supervisory =
circuits, with the idea if creating a power supply for my project that =
will delay startup.  However, I am not clear on how you could tie these =
devices into a regulator.  Basically, I would like to design a power =
supply that will shut down power to the whole board if any transients =
are detected and reset everything (lcd, eeproms, etc.) on power up. The =
design is going to be used in a homebuilt aircraft and I want my project =
to shut itself off when a transient is detected (starting the engine) =
and come back up automatically in a second or two after things =
stabilize.  Can anyone point me in the right direction?

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.