Hi Jen

>The bulk erase occurs very quickly, so the LED flashes so quickly I often
>don't even notice it.

That sounds familiar...


>After you erase the chip, click the "Blank" button to
>verify that the chip was erased successfully.  If it does not report
"Device
>is blank," try another chip.

Tried it with 400 :-)

> If it still doesn't erase, start checking errata sheets.

I'd better!

Thanks

Alan

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.