> I also have the same problem when I try to alter the bits in the
> OPTION_REG on a PIC16F84.  I noticed that using the old OPTION command
> will alter the bits, but MOVWF OPTION_REG (with the desired
> bits in the W register) will not.

You are aware than OPTION is in bank1?

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu