At 12:24 PM 8/28/02 -0500, llile@SALTONUSA.COM wrote: >This sounds like another classic CCS bug to me. Several times I have >found that #fuses bits work backwards in some of their releases, right >now I have a project for the 'F73 that must use "NOPUT" to *enable* the >power up timer. A sheepish tech at CCS explained that they are working on >this after I wasted a couple of hours pulling out my hair.. > >Try enabling your WDT, I'll bet the WDT will then turn off. Or else, >upgrade to the version du jour. Assuming the original poster is using a PS+, why not just look at the fuse data when the file is loaded into the programmer? dwayne -- Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 18 years of Engineering Innovation (1984 - 2002) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body