I have no problems.  I use picallw (PICALL v0.12e) and p16pro, read and
write to 18f452.

=D6mer YALHI
oyalhi@teksan.com.tr
http://www.teksan.com.tr
Tel : +90 212 613 22 00
Fax: +90 212 544 70 35


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Edson Brusque (Listas)
Sent: Wednesday, August 28, 2002 2:40 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: PICALLW with P16PRO problem on PIC18Fxxx devices


Hello,

    I'm having problems when burning PIC18Fxxx devices using P16PRO and
PICALLW software.

    1) PICALLW doesn't check device while recording.

    2) I always need to erase a device before recording.

    3) Device never reads correctly (verify never work) even if the
device content (wrote with WARP-13) is correct.

    I'm using the most recent version of PICALLW (0.12e - August/2002).

    Am I doing something wrong or are you having those problems too?

    Thanks,

    Brusque

-----------------------------------------------------------------
Edson Brusque                 C.I.Tronics Lighting Designers Ltda
Research and Development               Blumenau  -  SC  -  Brazil
Say NO to HTML mail                          www.citronics.com.br
-----------------------------------------------------------------

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body