At 10:24 PM 8/27/02 -0400, you wrote:
>Let's say I set an interrupt enable bit to 0.  While the interrupt is
>disabled, an event occurs which raises the interrupt flag.  Once the
>enable bit is set to 1 (and the flag has not be reset), is the interrupt
>called?

Yes, as soon as you set the enable bit.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
9/11 United we Stand

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.