In a message dated 08/24/2002 18:24:03 Eastern Daylight Time,
fredrik.axtelius@TELIA.COM writes:


> However, putting the LM35 on AN0 and reading make the values kinda "fuzzy".
> Normal room temepratur should give me something like 50 from AN0 which is
> what I get sometimes, the problem is that reading AN0 over and over, the
> value I get pend from 47 to 55.
>
> I thought the LM35 couldn't devliver enuff ampere so I put a LM324 between
> it an AN0, same result.
>
> Im a newbie, did I miss anything?
>
>

Make sure you have a 1.2K resistor in series with the LM and a .1ufd from the
AD pin to ground.

Sid

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu