You might want to try manually setting the config. bits in the code. When
you say "configuration bits dialog box" are you referring to the
"development mode" menu?  I believe this is for simulation and debugging,
and does not actually set the bits.

James Hyslop



-----Original Message-----
From: John Walshe [mailto:John.Walshe@INPACTMICRO.COM]
Sent: Friday, August 23, 2002 7:50 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: PS+ problem programming a 16F628


Hi Folks,
    has anyone had problems programming a 16F628 with Picstart (V3.00
firmware) via MPLAB (v5.7). For some reason the PS+ is sending the same
config word ( all 1's )to the device no matter what selection I set in
MPLAB. It is  like MPLAB is failing to pick up the settings from the
configuration bits dialog box.
I see this with two different PS+ programmers so I don't suspect the
programmer, although having said that they both are V3.00 firmware so
maybe.....

John


**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the sender immediately.

This footnote also confirms that this email message has been swept by
MIMEsweeper and Symantec Norton AntiVirus for the presence
of computer viruses.
**********************************************************************

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body