Hi Folks,
    has anyone had problems programming a 16F628 with Picstart (V3.00
firmware) via MPLAB (v5.7). For some reason the PS+ is sending the same
config word ( all 1's )to the device no matter what selection I set in
MPLAB. It is  like MPLAB is failing to pick up the settings from the
configuration bits dialog box.
I see this with two different PS+ programmers so I don't suspect the
programmer, although having said that they both are V3.00 firmware so
maybe.....

John
***************************************************************
John.Walshe@inpactmicro.com

INPACT MICROELECTRONICS (Irl) Ltd
21A Pouladuff Road,
Cork,
Ireland,

Tel: +353 21 4318296
Fax: +353 21 4318980

WWW.INPACTMICRO.COM
***************************************************************

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body