My guess would be you are re-using the 'Int' label and it doesn't like
that.

nick@veys.com | www.veys.com

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Michael A. Powers
> Sent: Thursday, August 22, 2002 1:32 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]: Assembler Errors
>
>
> Hello,
>
> I have a program in which I use two interrupt routines,  one
> for Timer 0 and one for Peripheral (UART).  My code looks like this:
>
> ;;----------------------------------------------------
> PAGE
>  org 0x000
>
>  goto Mainline
>
>  org 0x004
>
> ;;----------------------------------------------------
>
> Int
>     ; TMR0 Interrupt code
>  retfie
>
> ;;----------------------------------------------------
>  org  0x020 ; peripheral interupt
> Int
>     ; Peripheral (UART) interrupt code
> retfie
> ;;----------------------------------------------------
>
> This yields a few assembly errors that I am unfamiliar with.
> It is my understanding that TMR0 interrupts to 0x004 and
> Peripherals interrupt to 0x020, which I have done here.
> However, I get errors to the tune of:
>
> ERROR[118]:    .............................  Overwriting
> previous address
> contents (0020)
>
> on the lines for the peripheral interrupt.  What does that
> mean?  Have I set up these interrupts correctly?
>
> -Mike
>
> --
> http://www.piclist.com hint: The PICList is archived three
> different ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.