Another possibility is:

Cadint FREE http://www.cadint.com

Draw your schematic, screenprint (to clipboard), paste into paint, save
as JPG or GIF.  A side benefit is that when you are ready to lay out
your PCB your schematic is already in the needed format.  Cadint outputs
Gerbers ready to go at most board houses.

Regards,
Dave

Nelson Hochberg wrote:
>
> Some possibilities:
>
> Smartdraw $69 http://www.smartdraw.com/
> PCLogic Circuit Design $29 http://members.aol.com/atpclogic/index.html
> Circuit Shop $29 http://www.cherrywoodsystems.com/cshop1.htm
> MacroSim $29 http://www.macrosim.com/
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Peter Barick
> Sent: Tuesday, August 20, 2002 11:39 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [OT]: Schematic Software?
>
> Hi All,
> Re: Request For Software To Create Schematics To Email
>
> I'm on another list and the issue of "1,000 words = a good picture"
> came up. I thought such a means should be known here on PIC. I tried MS
> Paint and, yes, it can draw lines, but... . I would like it to have
> preformed electronic symbols that could be applied to a pallet
> workspace. Ideas?
>
> Here is the original query:
> >
> Bill brings up a good point. Does anyone have any recommendations for
> a
> quick and dirty way to do schematics for on-line explanations? Ideally,
> it
> would generate .jpg or .gif files of reasonable size without a lot of
> extra
> steps.
> John Andrews
> _____________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer@mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> >
> Peter, PICLister
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads