>>
We have a barrel type push button switch with LED inside, so there are 4
connectors on the end of the barrel, they stick straight out and are meant
to be soldered to or have a spade type connector slide onto them.

What I want is a socket type connector so the switch will plug into the PCB
at a right angle and no soldering or flying leads to connect, we are adding
8 switches so this will save much cost if it can be done.

...

Any ideas people?
<<

I would first look into getting right angle PCB mount switches.  There are
so many switch variants out there, that my first impression is there is
probably something suitable that mounts straight onto a PCB.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads