Yes it is accurate. It just only that you should ground RB3 when it is
connected in your circuit in using ICSP or else your PIC will be damaged
take it from my experience.

----- Original Message -----
From: "Tony Nixon" <tony.nixon@ENG.MONASH.EDU.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, August 19, 2002 6:50 AM
Subject: Re: PIC16F8XX EEPROM Memory Programming Specification


> As far as I know they are. My programming software works ok from it.
>
> "Peter L. Peres" wrote:
> >
> > Hi all,
> >
> > since time is coming for me to move to the 877 I'd like to know if the
> > document in $SUBJECT is accurate (esp. wrt. some threads that I saw on
> > this list). The question relates ESPECIALLY to whether the normal (not
> > LVP, not bootloader) ICSP programming commands and specifications in
said
> > document are valid.
> >
> > thanks,
> >
> > Peter
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
>
> --
> Best regards
>
> Tony
>
> mICros
> http://www.bubblesoftonline.com
> mailto:sales@bubblesoftonline.com
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu