On Sun, Aug 18, 2002 at 10:55:36PM +1000, Sean Alcorn (SYD) wrote:
> Byron,
>
> > If we ever come to a consensus, you will. It's the Designer/PICbase/PBK
> > box we've been talking about the last few weeks. I changed the name for
> > the Executive Overview thread to remove bias both for a particular design
> > and from the Beginner Only slant.
>
> I was talking about the attached files in Mike's post - of the PIC
> compatible MCUs

Sorry I missed that. I thought you were taking about the programmer, not the
target chip.

There didn't seem to be a programming specification anywhere. Hold on a virtual
minute and let me see if I can find out... OK I'm back and I found it here:

http://cat.pinnacle.com.tw/ic/emc/8bit/other/PROGRAM%20TIMING.pdf

The short answer is no. The programming pinout and algorithm is completely
different that the standard microchip one.

BTW these only seem to be OTP. Mike, do you know if they have a windowed part
that's eraseable.

I'd guess that this part myst be extremely price sensitive if it's worth taking
a look at. Can you give a cost estimate?

BAJ

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body