> If you are interested in a full-duplex, multi-drop RS-485 circuit with
> collision detection, I have in a 17C756 reference design (does not
> rely on using the 17C756).
>=20

I was under the impression that RS485 can not handle=20
collision detection reliably. Does this really work?

Ruben

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Elektronik
Box 9124, 200 39 Malm=F6, Sweden
TEL INT +46 40142078
FAX INT +46 40947388
ruben@pp.sbbs.se
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body