Looks like the problem is in the Warp 13 software.  Works good when warp 13
is used with-in MPLAB but the warp 13 driver software is not setting the
code protect bits correctly.

Well at least I can still develop my code with the driver software and
create the finals with-in mplab.  (that stinks)

----- Original Message -----
From: "Sean Alcorn (SYD)" <sdalcorn@AVION.COM.AU>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Saturday, August 17, 2002 10:26 AM
Subject: [PIC]: Real newbie question on ADC


> Hi guys,
>
> As I've stated in what became the much talked about PBK thread, I'm a
> relative newbie, however have designed a couple of commercial products and
> the list was a big help when I got stuck here and there.
>
> I've been mainly working on the PIC12C508 with a bit of development on
> PIC16F84As, then porting over to the 508s.
>
> I am having reasonable success, designing products quite quickly, and
> working in Assembler - rather that the BASIC which I originally bought.
>
> However I am totally stuck when it comes to applying the ADC. The
PIC12C671
> is a very practical device and I am looking forward to the "Future
Product"
> - PIC12F675 for the 10-bit ADC - however there are conflicting reports on
> the Microchip website as to whether this device will have 8-bit or 10-bit
> ADC.
>
> If you look in all the PIC books on applying the ADC, they basically say;
>
> Configure ADC
> Delay
> Turn on ADC
> Keep checking
> Get result from ADRES
>
> This is fine if working in perfect conditions on a bench, but in the real
> world, my circuits will be subjected to noisy industrial environments. I
> have read elsewhere that multiple readings are required - sort of like
> debouncing a pushbutton, I guess - but I have also read about 50Hz and
60Hz
> hum.
>
> I did post a question regarding the filtering of hum, and I was simply
> pointed to some example code for filters - which was all a little
daunting.
>
> What is the trick? Is it just a matter of taking multiple readings at a
> given frequency? I have read something about 40KHz - as it is a multiple
of
> both 50Hz and 60Hz
>
> Would love to hear from anybody who can help a newbie get to this next
> milestone.
>
> Regards,
>
> Sean
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.