It would be a bit strange to let a boardhouse make the board design,
because they charge by the board area so a sloppy (larger) board would
benefit them!

Olimex accepts eagle an .brd file, but that still means that you have to
make a board (but they will make the gerber etc from it). But try iy: it
is not that difficult.

And you could of course ask the list for a quote to do the work, there
are plenty who would consider doing it (for a fee, of course).

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of paul wood
> Sent: Friday, August 16, 2002 6:24 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [OT]: PCB making without Gerber file.
>
>
> Hello,
>
> I want to fabricate a few PCBs, but most of the PCB
> vendors need PCB information in Gerber format, I only
> know how to generate a schematic diagram using the
> "Capture" program of OrCAD, to generate PCB layout
> further is beyond my knowledge. Is there any way to
> solve my problem? or is there any vendor who will
> accept a schematic instead the completed Gerber files?
>
>
> Paul
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> HotJobs - Search Thousands of New Jobs
> http://www.hotjobs.com
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics