I have a problem developing an 18f programmer. I can do an erase, read
and write the eeprom, read the chip's ID, read code, but *not* write
code. I (try to) use single-pane writing. Can anyone see a problem in
the sequence below?

Wouter

   -- set single pane
   target_send_20( 0b_0000, 0x0E, 0x3C )
   target_send_20( 0b_0000, 0x6E, 0xF8 )
   target_send_20( 0b_0000, 0x0E, 0x00 )
   target_send_20( 0b_0000, 0x6E, 0xF7 )
   target_send_20( 0b_0000, 0x0E, 0x06 )
   target_send_20( 0b_0000, 0x6E, 0xF6 )
   target_send_20( 0b_1100, 0x00, 0x00 )

   -- select flash
   target_send_20( 0b_0000, 0x8E, 0xA6 )
   target_send_20( 0b_0000, 0x9C, 0xA6 )

   --  set address
   target_send_20( 0b_0000, 0x0E, 0x00 )
   target_send_20( 0b_0000, 0x6E, 0xF8 )
   target_send_20( 0b_0000, 0x0E, 0x00 )
   target_send_20( 0b_0000, 0x6E, 0xF7 )
   target_send_20( 0b_0000, 0x0E, 0x00 )
   target_send_20( 0b_0000, 0x6E, 0xF6 )

   -- load data
   target_send_20( 0b_1101, 0x11, 0x22 )
   target_send_20( 0b_1101, 0x33, 0x44 )
   target_send_20( 0b_1101, 0x55, 0x77 )
   target_send_20( 0b_1111, 0x66, 0x88 )

   wait_100us( 12 )

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics