Scott wrote:
> I haven't tried the F628 with picp/picstart yet, but here are a couple of
> suggestions: 1) Get a recent copy of picp 2) Update the picstart+  ROM.

Oops- just checked... I've got ROM 2.01 and the F62x needs 2.30, I must just
have been lucky that it worked... I'll upgrade that.

However, I do have the most current picp (0.4d?) downloaded from the piclist
mirror (cosmodog.com wasn't responding), and it doesn't have the 628 in the
supported processors list- (picp --help).  Is that because it detected my
picstart firmware version, or do I need to do something else to get it to
program the 628 reliably?  Has anyone else here got a version of picp that
mentions the F62x?

> gpsim -s file.cod

Thanks, I'll try that

> I think your debugging experience will be much nicer with symbols!

Definitely :-)

Thanks,

Nigel

--
Nigel Orr                          nigel.orr@palintest.com
Instrument Development Engineer    Tel: +44 191 491 0808
Palintest Ltd                      Fax: +44 191 482 5372



*************************************************************************************************
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify the sender immediately and then delete this e-mail.

E-mail transmission cannot be guaranteed to be secure or error free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard copy version.
*************************************************************************************************

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads