>         What pullups are you using? Sounds like you might be using pullups
that are
> too strong for the chips in question. Check the spec for the I2C chips you
> are using for the recommended pullups.

You don't check the specs of the IIC chips.  The IIC specification
explicitly states the maximum current sink required to get to logic 0 level.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu