In a message dated 08/10/2002 09:19:57 Eastern Daylight Time,
maryn.delhaye@SKYNET.BE writes:


> Hello , I got a problem with a connection between the PIC16F877 and the PC .
> I wrote this little program . Normally it sends continuous the letter 'A'
> to the PC . With hyperterminal i just get some strage letters and
> characters . Hyperterminal is set to 2400 8 - N - 1 . Do you see where my
> problem is ?
>
> Thanks
>

HyperT runs at N9600.  Make sure the PIC baud matches.  In addition, make
sure HyperT is set up for "Direct to Com2" or whatever port you are using.
Are you running the 877 direct or are you using FlashLab ?

Sid

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads