Olin Lathrop <olin_piclist@EMBEDINC.COM> wrote:
> With all this in mind, I wanted to see what kind of hardware it would
> take to implement a basic programmer.  The schematic I came up with
> is at http://www.embedinc.com/pic/prog.pdf.  I'd be interested to
> hear if I missed any gotchas from those who have been down this road
> before.

Would it be worthwhile to provide a voltage divider in the feedback loop
around IC2A, to allow Vdd to be driven 5% or 10% *above* the nominal value
during program verification? High-end device programmers do this, but maybe
it isn't necessary here.

-- Dave Tweed

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu