The newest software has a diagnostic feature that allows you to turn on all
Vdd and Vpp so that you can check them.  I was just not getting enough Vpp
through to the Pic 628 chip.  The 18 series seems to be more tolerant of
lower voltages.  I moved to an 18vDC and it works great.   Also with 10a
firmware I get to use the 40 pin Ziff.

Also the ISP connector works great.  I work almost exclusively with the
flash pics and when I design that baby has to be in circuit.

----- Original Message -----
From: "Sid Weaver" <NEWZED@AOL.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, August 09, 2002 8:44 AM
Subject: Re: [PIC]:Has any one got a warp13a to work with 16F628


> In a message dated 08/09/2002 08:03:50 Eastern Daylight Time,
> rixy@VVALLEY.COM writes:
>
>
> > Strange....I'm using a 9V 200ma wallwart. The smallest I have and it
works
> > fine
> > on the W13a.
> > Rick
> >
>
> You are asking for trouble.  The WARP needs 12VAC or 16VDC to operate
> properly for all chips.
>
> Sid
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu