In a message dated 08/09/2002 10:13:14 Eastern Daylight Time,
listsjosh@3MTMP.COM writes:


> Hi all. I have a few cases similar to:
> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=39196
> The surfaces are aluminum, but with a sort of textured surface. I would
> like to put some stickers (decals) on these cases, but I am having
> trouble getting things to stick to the non flat surface. Any ideas of
> what I could do? I was thinking about getting some 5 minute epoxy,
> spreading a thin layer on the case to even out the bumps, then pressing
> the sticker into the epoxy. It should work, but I'm worried I won't be
> able to contain the epoxy, it will spread wider than the sticker, and
> then look ugly. Any other ideas?
>
> Thanks,
>
> Josh
>

Josh, go to your drugstore and buy a roll of "Mounting Tape"  This stuff is
incredibly sticky and incredibly strong.  Comes in 1/2" widths, which is the
size of the Avery 5667 label.  Works for me.

Sid

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu