In a message dated 08/06/2002 12:12:44 Eastern Daylight Time,
listsjosh@3MTMP.COM writes:


> Hi all. After banging my head against my own code with no results, I've
> been looking for other code. The code at
> http://www.swampgas.com/robotics/irremote/
> looks promising. The code on http://www.k7on.com/robotics/maxremote.htm
> looks good as well, but it's in C, and I only do assembler. I will be
> doing some control things on the PIC itself, so all I need is receive
> code, no RS232 or anything like that. Ideally, some routine that I can
> look at and figure out where the output byte is placed would be cool.
> There was some discussion about this about a month or so back, did
> anything ever come of it? Does anyone have some easily usable Sony
> remote receiver code? I have much data about the actual format of the
> commands, I just suck at bit banging a receiver (which is essentially
> what I'm doing).
>

Josh, I have program that will read the signal from a Sony Universal Remote.
It works with the F873, the F876 and the F877.  However, my experience leads
me to beleive that 100% reliability can only be acheived using the Vishap
TSOP1140 40kHz IR detector.  You can try it with whatever detector you have
but the results may be inconsistent.  I weill share the code, but only on an
individual basis, so please contact me off-line.

Sid

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics