Dave Gomez <ilinux@DKGOMEZ.COM> wrote:

> I=B9m a newbie pic enthusiast, who=B9s already built my first couple of
> projects, but am looking at smoothing out the development cycle a bit.  I=B9m
> searching for a programmer I can hook up to my mac that does the following:

Dave, I've been working (ever so slowly) on a Mac port of linux command-line
tool for the Warp-13a programmer from Newfound Electronics
(http://www.newfoundelectronics.com/). I've used the Warp-13a successfully
on 16F877 projects.

I don't yet have a working Mac programmer, but I'm getting there. I've had
difficulty getting reliable serial communication up. I'll let you know when
I get it.

However, I did port the gnupic assembler to the CodeWarrior environment.
Currently I build my code using CodeWarrior (very crude, but nicer than
CLI), and then FTP the resulting .hex file to a PC laptop, from which I
program the part.

I'd like to hear from anyone else who would be interested in more native Mac
tools for PIC development.

Thanks!


--
Rick

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics