This is a multi-part message in MIME format.
--------------441D12A26CE6814D7A34EFF6
Content-Type: text/plain; charset=koi8-r
Content-Transfer-Encoding: 7bit



Byron A Jeff wrote:

>
> What type of serial EEPROM?. What kind of interface (SPI,I2C)?

SPI, I2C and microwire

> Not on a standard parallel port. In EPP mode all of the data lines become
> bidirectional. However the SPP is inputs or outputs only.

EPP is OK.
I am designing for new comps. :)

> Well it depends on your application. Unless you're doing master I2C I can't
> see how it would be a mass of logic. For SPI, like the 9366 style EEPROMs,
> you should only need one simple buffer chip.

Yes, but i want programmer which will have all-in-one without any jumpers or other
hardware mods. simple 8pin ZIFF and all other is software job!

>
> You haven't given enough information to formulate a reasoned reponse. You need
> to answer a bunch of questions:
>
> * What capacity?
> * What interface
> * Does the part need to be programmed in-circuit?
>
> The answers to your design questions are in the answers to those questions.
>
> BAJ

--------------441D12A26CE6814D7A34EFF6
Content-Type: text/x-vcard; charset=koi8-r;
 name="mpavlica.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Milan Pavlica YU7XW
Content-Disposition: attachment;
 filename="mpavlica.vcf"

begin:vcard
n:Pavlica;Milan
x-mozilla-html:FALSE
url:www.supersonicsystems.org
org:SuperSonic Systems
adr:;;;;;;
version:2.1
email;internet:mpavlica@ptt.yu
title:Chief
fn:Milan Pavlica
end:vcard

--------------441D12A26CE6814D7A34EFF6--

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads