I was surprised to hear the description of the PICDEM-2 board from Microchip. The one I have here is only a 2-layer PCB with a lot fewer parts/features. IIRC it cost about $70.00. I searched Digi-Key and found that the one being described is a new version, the "PICDEM-2 Plus". Digi-Key has it in stock for $99.00 as part number DM163022. Paul > -----Original Message----- > From: pic microcontroller discussion list > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Spehro Pefhany > Sent: Monday, August 05, 2002 11:29 AM > To: PICLIST@MITVMA.MIT.EDU > Subject: Re: [PIC]: Piclist Beginners Kit (PBK) > > > At 10:19 AM 8/5/02 -0400, you wrote: > > >What's the cost? > > Well, the incremental cost (ICD2 + PSU + PICDEM2) - (ICD2 + PSU) > is shown at $21 (Digikey), it was less at the Masters, of course. > > DV164006-ND - DV164007-ND = > 209 - 188 = > $21 > > The 4-layer board is 6.5" x 4.4" > and has: > > - 3 switches > - 5 LEDs (one power, 4 controlled by port pins) > - 2.4 x 1.7" proto area, ports all brought out > beside it (in order!) > - 2 x 16 COG LCD display (non backlit) > - cermet trimpot > - screw machined sockets for 40/28/18 pin DIPS > - 2 regulators > - socketed 4MHz fully size clock oscillator > - MAX232 equivalent > - 24LC256 SEEPROM > - 32kHz crystal > - two regulators, one of which is the 5-pin TO220 TC74A5 > - 9 pin serial connector > - RJ11 ICD connector > - PIC18F452 in 40 pin DIP > - 20mm piezo transducer and driver > - 9V battery snap, 2.1mm coaxial power socket, test points, > bypass caps and other discretes. > > (total about 75 parts) > > The ICD2 is pretty impressive too- interesting what it uses for the > USB port CPU. ;-) > > Best regards, > > Spehro Pefhany --"it's the network..." "The Journey is > the reward" > speff@interlog.com Info for manufacturers: http://www.trexon.com Embedded software/hardware/analog Info for designers: http://www.speff.com 9/11 United we Stand -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads