Hi all,

I don't know if anyone remembers, but I was making a propellor clock for
the flight ops staff at the aero club as appreciation for all the help
they gave to get my license.

I wanted to keep external things like buttons "inside" so I tried to use
the touch switch idea on Byte Crafts page but I couldn't get it to work
reliably. I ended up using a couple of QT110 sensors from Q-Prox. You
can see in the image below that to set the time or run the clock only
requires that you touch the front glass panel where indicated.

For something that I though would take a week or so has taken about 5.

It is nearly finished thank goodness, here is a gif of the project so
far if anyone is interested.


http://www.bubblesoftonline.com/prop2.gif


--
Best regards

Tony

mICros
http://www.bubblesoftonline.com
mailto:sales@bubblesoftonline.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu