CAN is a Bus-System with minimal overhead for the micro (when implemented= as full-can ...) 09/22/02 is too late for me, so i must research again for an small micro which is can capable ... anyone ever get pre production samples from microchip? BTW... is it possible to program the 18F... in circuit without the ICD2 ? are there any programs ? Many thanks michael ----- Original Message ----- From: "=D6mer Yalhi" To: Sent: Saturday, August 03, 2002 10:09 PM Subject: Re: where to get 18F258 > I just had a look at digikey, they say they will get them on 09/22/2002. > > What is can by the way, I think it's like communication protocol, but I > don't know what are its advantages or disadvantages... > > -----Original Message----- > From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On > Behalf Of Michael Kramer > Sent: Saturday, August 03, 2002 5:01 PM > To: PICLIST@MITVMA.MIT.EDU > Subject: where to get 18F258 > > > Hi ... > > when does those chips going to be released ? all german distributors ha= ve > none ;( > we need can-capable pic's for an application > > many thanks > michael > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu