> -----Original Message-----
> From: Epox [mailto:spowell5@NEO.RR.COM]
> Sent: Thursday, August 01, 2002 11:09 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC] RA2 competition when using I2C Slave Mode and A2D
>
>
> RA2 Competition? Red Alert 2?

ha ha wizaguy.

Page 69 of the pic 16f876 datasheet states that ADCON1 must be set so pin
RA5 (not 2, sorry) is configured as digital.  The table on page 112
indicates there are only 6 possible choices that set RA5 to digital.  This
only allows access to 3 A/D channels max.

Is there a better (low pin count) pic to use as an A/D I2C slave device that
will allow me to use 4-5 A/D?

-Derek

> ----- Original Message -----
> From: "Derek Cowburn" <derek@COWBURN.US>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Thursday, August 01, 2002 5:45 PM
> Subject: [PIC] RA2 competition when using I2C Slave Mode and A2D
>
>
> > Anyone know how to use more than 3 A/D channels on a 16F876
> when using I2C
> > in Slave Mode.  Seems like the pic needs AN2 to be Digital.
> >
> > Derek Cowburn
> >
> > --
> > http://www.piclist.com hint: The list server can filter out
> subtopics
> > (like ads or off topics) for you. See http://www.piclist.com/#topics
> >
> >
> >
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.