--=======83416D4=======
Content-Type: text/plain; x-avg-checked=avg-ok-64692A1E; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 8bit

Hi Neil:

I use ARES lite, www.labcenter.co.uk, it has the features you mentioned and
is very easy to use. Cost about $30 US

Cheers,

Chuck

At 11:31 7/30/2002 -0500, you wrote:

>Looking for PCB layout software...
>
>- Express PCB's SW is a piece of cake to use, but is proprietary
>    w/no standard formata.
>- Just started using Eagle, but it is limited to small boards.
>
>Any others that may give me Eagle functionality BUT with bigger
>boards?  I don't mind paying a bit for it, say $50 or so.  My
>requirements are simple -- just need layout (no schematic or
>autorouting), 2 layers, boards of say 1 sq ft, parts library
>not important.
>
>I found, and need to experiment with Protel, Orcad and Mentor
>Graphics, but I know the prices will be up there.
>
>Cheers,
>-Neil.
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>
>
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.351 / Virus Database: 197 - Release Date: 4/19/2002

--=======83416D4=======
Content-Type: text/plain; charset=us-ascii; x-avg=cert; x-avg-checked=avg-ok-64692A1E
Content-Disposition: inline


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.351 / Virus Database: 197 - Release Date: 4/19/2002

--=======83416D4=======--

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu