At 03:13 PM 7/29/02 -0500, Richard Mellina wrote: >I used the ";" character to comment as always. This is an example of how it >was commented: > > >name equ h'20' ; this register is for so >and so > >name2 equ 4 ; this bit is for so and so > >#define name3 [something] ; this is used by so and so > > >MPASM created an error for every letter that was not a hex number, even the >semicolons. When I took all the comments out it assembled with no errors. >Perhaps a setting is not right? Thanks! Any chance that you have an unmatched ' somewhere? dwayne BTW - I tend to mix the radix definitions up - I use 0x20, .30 and b'00001111' for hex, decimal and binary, respectively. No real reason for doing so . . . dwayne -- Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 18 years of Engineering Innovation (1984 - 2002) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body