For Richard Mellina

Find a nice piece of hardwood, oak, maple, poplar or what ever that is about
.350 think.  If you have a good power saw you can cut it close to this
thickness.  Carefully sand down the wood until it is .280 thick.  Put your
chip on the edge and press the pins hard against the wood.  If you have it
sanded properly it will fit a DIP socket perfectly.  Took me about an hour to
make one just right but it works perfectly, and it will last forever.

Sid

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body