in c, printf is default solution. if you are using c? ----- Original Message ----- From: "Claudio Tagliola" To: Sent: Thursday, July 11, 2002 8:10 AM Subject: Re: [PIC] RS232 Ascii to Hex tool > Easiest solution is to capture to file and then view with a hex viewer > (winhex or something similar). Hyperterm does get all 8 bits and also stores > them to file, just can't display them well. > > Regards, > Claudio > > -----Oorspronkelijk bericht----- > Van: pic microcontroller discussion list > [mailto:PICLIST@MITVMA.MIT.EDU]Namens Max Foo > Verzonden: donderdag 11 juli 2002 13:49 > Aan: PICLIST@MITVMA.MIT.EDU > Onderwerp: [PIC] RS232 Ascii to Hex tool > > > Hi, > > Using the usart of a pic16f74 to communicate with a PC , > (the pic is reading the a/d values and sending them to the PC), > and what I would like to know is if anyone knows of a ascii to hex > software terminal program? > > The windows hyper terminal makes it difficult to use since the data is > in 7bit ASCII. I need to see all 8bits. Any free utilities like this > out there? > > Thanks, > Max > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads