I've been looking for a chassis mount 3 pin DIN connector, that 1).  Doesn't
have those butt ugly bolt on "dog ears", and 2) don't cost an arm and a leg.

What I want is something that is preferably black (plastic works), that can
mount onto a 1/16" thick plastic/metal faceplate, and doesn't need two extra
nuts and bolts to do it (i.e., has a round bezel on the outside, with a nut that
threads onto the body from the backside).

I did find a somewhat suitable looking part at Mouser that had a big nut that
secured it to the back of the faceplate, but they want like $4.00 a piece for
them.  They use to have a snap in part that was cheaper (similar to a snap in
rocker switch), but I guess the Mfg. has dicontinued it according to them.

BTW, already checked out digikey and MCM Electronics, and they have nothing
suitable.

Any leads are greatly appreciated!

The "other" Bob

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads